[ROVERNET - UK] 3500s rear calipers
vmitps at netspace.net.au
Sat Apr 21 05:12:13 BST 2007
According to the manual: Yes.
I can't be bothered getting under it to look...
I can't follow your second request!
----- Original Message -----
From: "Bill Robertson" <rover2000nut at hotmail.com>
To: <rovernet at lyris.ccdata.com>
Sent: Saturday, April 21, 2007 1:38 PM
Subject: [ROVERNET - UK] 3500s rear calipers
> I'm just reattaching the calipers and want to double check.........the top
> brake hose goes to the brake line, and the bottom hose goes to the other
> caliper...........my mind is slipping ...........
> Also i have got another dip switch for the headlights.........i assume its
> from a later car as it has a different connecter and has 2 lights on the
> switch..................it looks like i'll have to take the connector off
> and solder the wires from the old one which was rusty and bent as the 5
> wires only stick out of the harness 1/2 an inch to 1 inch and i've got 2
> at best and by the time i wiggle 3 in i've pulled one out..............i
> ready to burn it in the garage rather than buther the connector but
> better of it..........the garage is attached to the house
> question is the switch moves up and down also ...............does it work
> the highs and low beams independently or what
> Thanks again
> Bill Robertson
> Win a webcam! Nominate your friend's Windows Live Space in the Windows
> Spaces Sweetest Space Contest and you both could win!
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow
> Back-up list and photos at:
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 269.5.5/769 - Release Date: 19/04/2007
More information about the rovernet