[ROVERNET - UK] Front end alignment

[Netspace]

Pulls to the right when...
that isn't usually a toe problem.
Get measurements from shop on castor and camber.


----- Original Message ----- 
From: "Steven Dibdin" <sdibdin at hotmail.com>
To: <rovernet at lyris.ccdata.com>
Sent: Tuesday, May 27, 2008 4:34 AM
Subject: Re: [ROVERNET - UK] Front end alignment


>
>
> HI Slats,
>
> Yes, lots of fun. The Rover was never a disapointment. You wouldn't 
> recognise the way it runs now! Smooth idle, good brakes (both servos 
> rebuilt), gear lever joints sorted. Drive like new now. Just want to get 
> the tracking sorted so that it doesn't pull to the right and she'll be set 
> for the summer.
>
> Cheers,
>
> Steven
>
>> From: slatskars at comcast.net
>> To: rovernet at lyris.ccdata.com
>> Date: Mon, 26 May 2008 17:20:04 +0000
>> Subject: Re: [ROVERNET - UK] Front end alignment
>>
>> Hi Steven,
>>
>> Sounds like you are having fun. I hope the car was not too big a 
>> disapointemnt? I thought that it was worth restoring, when I saw it. I'm 
>> sure it will be great when you are done.
>>
>> My latest toy is a 67 Porsche 912. It was a one owner car that has not 
>> been driven since 1982. It belonged to a friend, that passed away. I had 
>> helped him pull the engine and transaxle about a year before he died. I 
>> was sxheduled to go back to Calif. to help him put it back together about 
>> a month after he died. He couldn't remember why he had stopped driving 
>> it. I bought it from his Daughter (also a good friend). I mentioned that 
>> he couldn't remember why he had stopped using it. She said, "He should 
>> have asked me, I was driving it when it died". It was stuck in 1st gear. 
>> I bought another transaxle for $400. I am going to put new cylinders and 
>> pistons in it. The heads are already done. It is right at 99,000 miles. 
>> The body work is 98 percent done, almost ready for painting. A nice 
>> Bermuda Yellow. Should be a great car. I hope to drive it back to 
>> Pittsburg in 2010 for a hish school reunion. The 912 should get decent 
>> milage, 1720 cc with the new 86 mm cylinders.
>>
>> Slats
>> -------------- Original message ----------------------
>> From: Steven Dibdin
>>>
>>> Hi Slats,
>>>
>>> Sounds entertaining! Not sure if would like to try that in Suburban NJ! 
>>> Even
>>> though the nut's still on there.
>>>
>>> SD-
>>> _______________________________________________
>>> Rovernet mailing list
>>> Rovernet at lyris.ccdata.com
>>> To unsubscribe, go to this web page, look near the bottom and follow
>>> instructions:
>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>> Back-up list and photos at:
>>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the bottom and follow 
>> instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at:
>> http://autos.groups.yahoo.com/group/Rover_net/
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.24.1/1466 - Release Date: 
> 25/05/2008 6:49 PM
>
>