[ROVERNET - UK] P6 Oil Filter

[Eric Russell]

John,
I'll add Carquest.
Thanks,
Eric



--- John Burkhard <burkhaj at earthlink.net> wrote:

> Looks like all the WIX manufactured filters that are
> correct for the Rover 
> 2000 / SC&TC have the last three numbers of ..806. 
> WIX 51806, NAPA 1806, 
> CARQUEST 85806.  I hope this helps.  jb
> ----- Original Message ----- 
> From: "Eric Russell" <p6rovers at yahoo.com>
> To: <rovernet at lyris.ccdata.com>
> Sent: Thursday, August 04, 2005 9:16 PM
> Subject: Re: [ROVERNET - UK] P6 Oil Filter
> 
> 
> > Ron,
> > Confused but want to learn:
> >
> > Our RCCC table shows the WIX filter as having an
> > anti-drainback valve but no standpipe is
> mentioned.
> >
> > In my post regarding the Baldwin filter, their
> website
> > mentions more than the valve:
> > *Anti-Drainback Valve
> > *8 PSI By-Pass Valve
> > *Standpipe
> >
> > So ................ do you mean you are looking
> for a
> > filter with an internal standpipe?  Are you saying
> > that the WIX is not recommended for the 2000TC? 
> Shall
> > I remove the listing?
> >
> > Last July, Peter Heaster, Malcolm Tait and I
> studied
> > Peter's reference books and came up with that
> list.  I
> > think Malcolm was looking for filter options at
> that
> > time.
> >
> > Eric
> >
> >
> >
> >
> >
> > --- Ron Morey <morey814 at hotmail.com> wrote:
> >
> >> Greetings all. Today I walked into my local NAPA
> >> store and asked about a
> >> 51806 filter. To my shock and amazement they had
> >> one. The price for a Wix
> >> filter-<$5. This filter has the tube. Thanks to
> Eric
> >> and many others it is
> >> the one suggested for a 2000TC. It fits a Perkins
> >> diesel 4.236 litre engine
> >> fitted in forklifts etc. It also fits some Massey
> >> Ferguson tractors. That is
> >> probably not good news to most of you. The Wix
> site
> >> lists a 68 2000TC as a
> >> 6cyl that takes the 51515 filter. I have that
> filter
> >> on the car now and it
> >> does not retain the oil. So they are wrong on two
> >> counts.
> >> I hope you find this helpful. I kick myself for
> the
> >> years I have used a
> >> filter without the retaining pipe.
> >> Ron.
> >> >From: Eric Russell <p6rovers at yahoo.com>
> >> >Reply-To: rovernet at lyris.ccdata.com
> >> >To: rovernet at lyris.ccdata.com
> >> >Subject: Re: [ROVERNET - UK] P6 Oil Filter
> >> >Date: Mon, 1 Aug 2005 23:00:58 -0700 (PDT)
> >> >
> >> >Ron,
> >> >When I went to the websites for AC-Delco,
> >> Beck-Arnley,
> >> >Hastings, and Motorcraft, they didn't show a
> >> listing
> >> >for the numbers in the archive or for the Rover
> >> >application.
> >> >
> >> >If anybody can find a current match, I'd like to
> >> use
> >> >the information.  I notice that this list comes
> >> from a
> >> >1997 archive.
> >> >
> >> >Eric
> >> >
> >> >
> >> >--- Ron Venter <venterrh at telus.net> wrote:
> >> >
> >> > > At 09:10 AM 05-08-01, you wrote:
> >> > > >After careful research last year, (July I
> >> think) we
> >> > > >installed some P6 Oil Filter
> cross-references
> >> on
> >> > > our
> >> > > >website.
> >> > > >
> >> > > >If anyone has other brands with the
> >> recommendations
> >> > > >discussed, please advise and I'll include
> them
> >> in
> >> > > the
> >> > > >chart.
> >> > > >
> >> > > >Eric
> >> > >
> >> > >
> >> > > From: RoverP6B at pacbell.net
> >> > >
> >> > > Date: Thu, 29 May 1997 19:01:49 +0000
> >> > >
> >> > > To: rovernet at ganglion.anes.med.umich.edu
> >> > >
> >> > > Subject: Re: [Rovernet] 2200 TC Oil Pressure
> >> > >
> >> > > References:
> >> > >
> >> <3.0.32.19970529225615.006c3dfc at mail3.tripnet.se>
> >> > >
> >> > > X-MIME-Autoconverted: from 8bit to
> >> quoted-printable
> >> > > by mail-gw3.pacbell.net
> >> > > id TAA15012
> >> > >
> >> > > Sender:
> >> owner-rovernet at ganglion.anes.med.umich.edu
> >> > >
> >> > > Reply-To:
> rovernet at ganglion.anes.med.umich.edu
> >> > >
> >> > > X-MIME-Autoconverted: from quoted-printable
> to
> >> 8bit
> >> > > by huey.cadvision.com
> >> > > id UAA227024
> >> > >
> >> > >
> >> > > Tomas Börjeson wrote:
> >> > >
> >> > >  >
> >> > >
> >> > >  > Does anyone know any other manufacturer
> for
> >> this
> >> > > filter and maybe a # as
> >> > >
> >> > >  > well ?
> >> > >
> >> > >  > My local FRAM agent says that #PH 2821A
> has
> >> been
> >> > > discontinued. (At least In
> >> > >
> >> > >  > SWEDEN )
> >> > >
> >> > >
> >> > > Hi Tomas,
> >> > >
> >> > >
> >> > > Fram lists these #s in their "Master Catalog"
> as
> >> > > interchanging with
> >> > >
> >> > > the PH 2821A oil filter for the Rover 2000. I
> >> hope
> >> > > it helps.
> >> > >
> >> > >
> >> > > AC-Delco PF42, PF939, SC, X16
> >> > >
> >> > > Baldwin BT216
> >> > >
> >> >Snipped
> >> >
> >> >
> >> >Webmaster & Magazine Editor:
> >> >The Rover Car Club of Canada -  www.roverclub.ca
> >> >
> >>
> >__________________________________________________
> >> >Do You Yahoo!?
> >> >Tired of spam?  Yahoo! Mail has the best spam
> >> protection around
> >> >http://mail.yahoo.com
> >> >
> >> >_______________________________________________
> >> >rovernet mailing list
> >> >rovernet at lyris.ccdata.com
> >> >To unsubscribe, go to this web page, look near
> the
> 
=== message truncated ===


Webmaster & Magazine Editor:
The Rover Car Club of Canada -  www.roverclub.ca


		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs