[ROVERNET - UK] P6 Oil Filter

John Burkhard burkhaj at earthlink.net
Fri Aug 5 18:21:49 BST 2005


Looks like all the WIX manufactured filters that are correct for the Rover 
2000 / SC&TC have the last three numbers of ..806.  WIX 51806, NAPA 1806, 
CARQUEST 85806.  I hope this helps.  jb
----- Original Message ----- 
From: "Eric Russell" <p6rovers at yahoo.com>
To: <rovernet at lyris.ccdata.com>
Sent: Thursday, August 04, 2005 9:16 PM
Subject: Re: [ROVERNET - UK] P6 Oil Filter


> Ron,
> Confused but want to learn:
>
> Our RCCC table shows the WIX filter as having an
> anti-drainback valve but no standpipe is mentioned.
>
> In my post regarding the Baldwin filter, their website
> mentions more than the valve:
> *Anti-Drainback Valve
> *8 PSI By-Pass Valve
> *Standpipe
>
> So ................ do you mean you are looking for a
> filter with an internal standpipe?  Are you saying
> that the WIX is not recommended for the 2000TC?  Shall
> I remove the listing?
>
> Last July, Peter Heaster, Malcolm Tait and I studied
> Peter's reference books and came up with that list.  I
> think Malcolm was looking for filter options at that
> time.
>
> Eric
>
>
>
>
>
> --- Ron Morey <morey814 at hotmail.com> wrote:
>
>> Greetings all. Today I walked into my local NAPA
>> store and asked about a
>> 51806 filter. To my shock and amazement they had
>> one. The price for a Wix
>> filter-<$5. This filter has the tube. Thanks to Eric
>> and many others it is
>> the one suggested for a 2000TC. It fits a Perkins
>> diesel 4.236 litre engine
>> fitted in forklifts etc. It also fits some Massey
>> Ferguson tractors. That is
>> probably not good news to most of you. The Wix site
>> lists a 68 2000TC as a
>> 6cyl that takes the 51515 filter. I have that filter
>> on the car now and it
>> does not retain the oil. So they are wrong on two
>> counts.
>> I hope you find this helpful. I kick myself for the
>> years I have used a
>> filter without the retaining pipe.
>> Ron.
>> >From: Eric Russell <p6rovers at yahoo.com>
>> >Reply-To: rovernet at lyris.ccdata.com
>> >To: rovernet at lyris.ccdata.com
>> >Subject: Re: [ROVERNET - UK] P6 Oil Filter
>> >Date: Mon, 1 Aug 2005 23:00:58 -0700 (PDT)
>> >
>> >Ron,
>> >When I went to the websites for AC-Delco,
>> Beck-Arnley,
>> >Hastings, and Motorcraft, they didn't show a
>> listing
>> >for the numbers in the archive or for the Rover
>> >application.
>> >
>> >If anybody can find a current match, I'd like to
>> use
>> >the information.  I notice that this list comes
>> from a
>> >1997 archive.
>> >
>> >Eric
>> >
>> >
>> >--- Ron Venter <venterrh at telus.net> wrote:
>> >
>> > > At 09:10 AM 05-08-01, you wrote:
>> > > >After careful research last year, (July I
>> think) we
>> > > >installed some P6 Oil Filter cross-references
>> on
>> > > our
>> > > >website.
>> > > >
>> > > >If anyone has other brands with the
>> recommendations
>> > > >discussed, please advise and I'll include them
>> in
>> > > the
>> > > >chart.
>> > > >
>> > > >Eric
>> > >
>> > >
>> > > From: RoverP6B at pacbell.net
>> > >
>> > > Date: Thu, 29 May 1997 19:01:49 +0000
>> > >
>> > > To: rovernet at ganglion.anes.med.umich.edu
>> > >
>> > > Subject: Re: [Rovernet] 2200 TC Oil Pressure
>> > >
>> > > References:
>> > >
>> <3.0.32.19970529225615.006c3dfc at mail3.tripnet.se>
>> > >
>> > > X-MIME-Autoconverted: from 8bit to
>> quoted-printable
>> > > by mail-gw3.pacbell.net
>> > > id TAA15012
>> > >
>> > > Sender:
>> owner-rovernet at ganglion.anes.med.umich.edu
>> > >
>> > > Reply-To: rovernet at ganglion.anes.med.umich.edu
>> > >
>> > > X-MIME-Autoconverted: from quoted-printable to
>> 8bit
>> > > by huey.cadvision.com
>> > > id UAA227024
>> > >
>> > >
>> > > Tomas Börjeson wrote:
>> > >
>> > >  >
>> > >
>> > >  > Does anyone know any other manufacturer for
>> this
>> > > filter and maybe a # as
>> > >
>> > >  > well ?
>> > >
>> > >  > My local FRAM agent says that #PH 2821A has
>> been
>> > > discontinued. (At least In
>> > >
>> > >  > SWEDEN )
>> > >
>> > >
>> > > Hi Tomas,
>> > >
>> > >
>> > > Fram lists these #s in their "Master Catalog" as
>> > > interchanging with
>> > >
>> > > the PH 2821A oil filter for the Rover 2000. I
>> hope
>> > > it helps.
>> > >
>> > >
>> > > AC-Delco PF42, PF939, SC, X16
>> > >
>> > > Baldwin BT216
>> > >
>> >Snipped
>> >
>> >
>> >Webmaster & Magazine Editor:
>> >The Rover Car Club of Canada -  www.roverclub.ca
>> >
>> >__________________________________________________
>> >Do You Yahoo!?
>> >Tired of spam?  Yahoo! Mail has the best spam
>> protection around
>> >http://mail.yahoo.com
>> >
>> >_______________________________________________
>> >rovernet mailing list
>> >rovernet at lyris.ccdata.com
>> >To unsubscribe, go to this web page, look near the
>> bottom and follow
>> >instructions:
>> >http://mailman.nipltd.com/mailman/listinfo/rovernet
>>
>>
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the
>> bottom and follow instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>
>
>
>
> Webmaster & Magazine Editor:
> The Rover Car Club of Canada -  www.roverclub.ca
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet 




More information about the rovernet mailing list