[ROVERNET - UK] 3.5 Rear main seal replacement
Shirley & Barry Lafbery
lafbery at telus.net
Tue Jul 1 00:44:16 BST 2008
Hi Bill
When I did my 3500s rear main seal I bought an SD1 seal took the
block to a machine shop (actually the one at work) and had them machine the
block with the rear main cap in place to take the SD1 seal it worked out
great and I never had a problem.
Barry
>
> I'm wondering if any of you have replaced your rear main oil seal (the
> rope style) with a neoprene one..........I''ve got one from D&D but the
> intructions are befuddling me...............You are to run a small bead of
> silicone out to the V shaped groove on the main cap......(good so
> far)...Now it says after installing the cap, and torqing it..... inject
> silicone (with supplied syringe) in the V shaped groove of the main
> cap......making sure the silicone fills the groove all the way to the
> bottom.................HOWEVER i'm looking at the cap and the rear flange
> on the crank which runs in this V groove...........If i inject silicone
> here its mostly going to go to the main bearing side ........obviously not
> good............Have any of you used this seal from D&D so maybe you could
> explain it better.............I phoned Mark at D&D this morning and
> thought i understood but now i'm not sure and they are closed till Wed or
> Thurs and i'd like to get going here on my days off
>
> Thanks
> Bill Robertson
>
>
More information about the Rovernet
mailing list