[ROVERNET - UK] Re: rovernet Digest, Vol 57, Issue 41
Eric Russell
p6rovers at yahoo.com
Fri Aug 17 22:24:10 BST 2007
Ohhhh.... you wanted a manual for a Webasto sunroof.
Sorry, I have not seen one of those.
Eric
--- denlet <denlet at wanadoo.fr> wrote:
>
>
>
> Le 17/08/07 19:24,
> « rovernet-request at lyris.ccdata.com »
> <rovernet-request at lyris.ccdata.com> a écrit :
>
> > Send rovernet mailing list submissions to
> > rovernet at lyris.ccdata.com
> >
> > To subscribe or unsubscribe via the World Wide
> Web, visit
> >
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> > or, via email, send a message with subject or body
> 'help' to
> > rovernet-request at lyris.ccdata.com
> >
> > You can reach the person managing the list at
> > rovernet-owner at lyris.ccdata.com
> >
> > When replying, please edit your Subject line so it
> is more specific
> > than "Re: Contents of rovernet digest..."
> >
> >
> > [ROVERNET-UK]
> >
> > Today's Topics:
> >
> > 1. Some questions on P6 (denlet)
> > 2. RE: Some questions on P6 (Chris J Wilson)
> > 3. Rover club of New england (Eric Russell)
> > 4. RE: Some questions on P6 (Eric Russell)
> > 5. Re: RE: rovernet Digest, Vol 57, Issue 37
> (Eric Russell)
> > 6. Re: Some questions on P6 (Eric Russell)
> > 7. Re: carb question (Ben Rodgers)
> > 8. Re: Some questions on P6 (Slatskars)
> >
> >
> >
>
----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 17 Aug 2007 13:57:23 +0200
> > From: denlet <denlet at wanadoo.fr>
> > Subject: [ROVERNET - UK] Some questions on P6
> > To: <rovernet at lyris.ccdata.com>
> > Message-ID: <C2EB59C3.3946%denlet at wanadoo.fr>
> > Content-Type: text/plain; charset="ISO-8859-1"
> >
> > Bonjour de Paris,
> >
> > Eric Russel had posted a call for help to a
> webasto sliding sunroof ( or
> > Brittax ) for a rover P6:can you find an manual ,
> second hand one ( full
> > size about 1000 mm x 1200 ) for me, the repair is
> not important, good or not
> > but complete.
> > I try to finish my rover 3500 of 1973 to tow an
> old trailer called NOTIN.
> > Do you have an experience in towing with a P6?
> > I think that I will have a problem of level with
> the rear of the car: can I
> > find a road leveler shocs absorber or is it better
> to make a hardener
> > spring?
> > Is it better to fit polyurétane busches?
> >
> > Thank you for your help.
> >
> > denis letailleux
> >
> >
> >
> >
> >
> >
> > ------------------------------
> >
> Bonjour,
>
> Sorry for my poor english.
> ERIC:you had understood that I am after a "manual"
> for rover P6 ,but I
> bought last year a package of 7 books on P6 with
> ebay.
> I try to find a MANUEL webasto sliding sunroof:you
> can see what I want if
> you have a look on the green P6 of Eric Russel: a
> full size sunroof ( 1000
> mm x 1200 )
>
> I find in Belgium a factory who can make little
> spring to fit inside the
> stock spring:it's one solution.
> I find new classics KONI shocks absorbers: second (
> good ) solution.
> The better will be a leveller shocks absorbers ( see
> the post of SLATS )
> like MONROE but I can't find any new one.
>
> SLATS: thank you for your answer, your solution is
> good, but today any
> factory can sell air shocks absorbers for P6
> I had sent emails to Koni,Monroe,Osrav , but
> nothing.
> Do you know a mark still alive for that.
>
> ALL:
> Have somebody an advice on polyuréthane busches?
> Is the noise more important inside the car.
>
> au revoir denis
>
>
>
>
> > Message: 2
> > Date: Fri, 17 Aug 2007 12:57:05 +0100
> > From: "Chris J Wilson" <chris at chris-wilson.org>
> > Subject: RE: [ROVERNET - UK] Some questions on P6
> > To: <rovernet at lyris.ccdata.com>
> > Message-ID:
> <003201c7e0c5$bf769fb0$8b4f200a at acerlaptop>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Hello Denis,
> >
> > If you're after a workshop manual, take a look at
> eBay. I noticed several on
> > there last night when I was looking around. Follow
> these links for two
> > examples:
> >
> >
>
http://cgi.ebay.co.uk/Rover-3500-P1-1968-1974-Haynes-manual-RARE_W0QQitemZ23
> >
>
0160790048QQihZ013QQcategoryZ18413QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
> >
> >
>
http://cgi.ebay.co.uk/Rover-3500-P1-1968-1974-Haynes-manual-RARE_W0QQitemZ23
> >
>
0160790048QQihZ013QQcategoryZ18413QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
> >
> >
> > As for towing, I've towed trailers on my 2000SC
> and 3500S in the past, but
> > would recommend stiffer shock absorbers that the
> standard unless you fancy
> > replacing your exhaust. The engine and chassis
> will definitely handle the
> > towing without any problems though. My 2000SC had
> a smaller diameter set of
> > springs inside the original ones when I bought it.
> With the new shocks I
> > fitted, it seemed to handle towing okay.
> >
> > Regards,
> >
> > Chris
> >
> >
>
>
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the
> bottom and follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
Webmaster of The Rover Car Club of Canada
Website: http://www.roverclub.ca/
Webmaster of a variety of sites from:
http://www.websrus.ca
____________________________________________________________________________________
Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545433
More information about the rovernet
mailing list