[ROVERNET - UK] P6 - Query re fitting new seal to rear boot deck

Paul Smith Paul.Smith at auroraenergy.com.au
Wed Nov 1 22:34:30 GMT 2006


Eh, it isn't the dining table, can't see a problem.

-----Original Message-----
From: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com]On Behalf Of Peter Mitchell
Sent: Thursday, 2 November 2006 9:27 am
To: rovernet at lyris.ccdata.com
Subject: RE: [ROVERNET - UK] P6 - Query re fitting new seal to rear boot
deck


HiPaul,

Very much appreciated, thank you.  My wife will be pleased too as I have the
decker panel on a trestle table in the living room!

Cheers

Peter 

-----Original Message-----
From: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com] On Behalf Of Paul Smith
Sent: Thursday, 2 November 2006 5:21 AM
To: rovernet at lyris.ccdata.com
Subject: RE: [ROVERNET - UK] P6 - Query re fitting new seal to rear boot
deck

I should be able to photograph mine tonight and send them through.

PVS

-----Original Message-----
From: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com]On Behalf Of Peter Mitchell
Sent: Wednesday, 1 November 2006 9:19 pm
To: rovernet at lyris.ccdata.com
Subject: [ROVERNET - UK] P6 - Query re fitting new seal to rear boot deck


Hi Netters,

I am in the process of replacing the rear boot deck seal on my P6B. I have
the rear decker panel out on a table with the seal pushed into place ready
to be secured by the curved pieces of metal frame.

My query is:  The seal as supplied is a bit too long.  Before I do any
cutting, could anyone with a P6 please advise:

Is the deck seal simply cut off square at the end, or is there a chamfer?
I've been going through my photographs to see if I have one for comparison,
but no luck so far.

(As you can see, the purchase of a workshop manual is imminent).

I'd be grateful for advise and possibly even a photo of a seal in place if
it is not too much trouble.

Once again I must say that I'd have given up on my restoration without
Rovernet.

Kind regards


Peter Mitchell
Perth Western Australia 


_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow
instructions:
http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at:
http://autos.groups.yahoo.com/group/Rover_net/



_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow
instructions:
http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at:
http://autos.groups.yahoo.com/group/Rover_net/


_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow instructions:
http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at:
http://autos.groups.yahoo.com/group/Rover_net/





More information about the rovernet mailing list