[ROVERNET - UK] Rover SD1 gearbox

[Damien]

Thank you that would be excellent

Damien

-----Original Message-----
From: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com] On Behalf Of A.G. Opstal van
Sent: Monday, 9 January 2006 6:42 PM
To: rovernet at lyris.ccdata.com
Subject: RE: [ROVERNET - UK] Rover SD1 gearbox 

Hi Damien,

I did this conversion. You have to remove some
ribs in the gearboxtunnel. Clutchslave can be
an issue. Better to use a SD1 clutch slave.
Then you have to reroute and alter the speedocable 
where it enters the 5-speedbox.
Make some new large holes in the tunnel for access
to oil and speedocable fitment.
Speedo calibration is wrong it shows 25% slow.
Rest is easy.

I'll send you an article of the conversion.

Lex van Opstal.

 



-----Oorspronkelijk bericht-----
Van: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com] Namens Damien
Verzonden: zondag 8 januari 2006 3:45
Aan: rovernet at lyris.ccdata.com
Onderwerp: [ROVERNET - UK] Rover SD1 gearbox 


Can anyone tell me what is involved in changing a P6B 3500S four speed
box to a SD1 5 speed? Is there many modifications to make or is it
basically a direct swap

Thanks

Damien



_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow
instructions: http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at:
http://autos.groups.yahoo.com/group/Rover_net/

_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow
instructions:
http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at:
http://autos.groups.yahoo.com/group/Rover_net/