[ROVERNET - UK] Re: rovernet Digest, Vol 49, Issue 7

Paul Smith Paul.Smith at auroraenergy.com.au
Mon Dec 4 22:02:16 GMT 2006


Apparently it works if you remove the cam cover.
You also need to rotate the gbox 90 degrees.

PVS

-----Original Message-----
From: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com]On Behalf Of ralph kafesjian
Sent: Tuesday, 5 December 2006 7:03 am
To: rovernet at lyris.ccdata.com
Subject: [ROVERNET - UK] Re: rovernet Digest, Vol 49, Issue 7


In my experience with a 67 2000TC, the space for rear
movement of the trans/bellhousing to remove same by
dropping without moving engine lacks about 3 cm. I
plan to see if I can indent the firewall in the
appropriate location so the dropping can be done if I
ever need to do it again. Otherwise, at a minimum, the
engine etc must be freed up to move forward and tilt,
a lot of disconnecting etc. I think the Brits missed
the measurement when they designed. .....raffi


--- rovernet-request at lyris.ccdata.com wrote:

> Send rovernet mailing list submissions to
> 	rovernet at lyris.ccdata.com
> 
> To subscribe or unsubscribe via the World Wide Web,
> visit
> 	http://mailman.nipltd.com/mailman/listinfo/rovernet
> or, via email, send a message with subject or body
> 'help' to
> 	rovernet-request at lyris.ccdata.com
> 
> You can reach the person managing the list at
> 	rovernet-owner at lyris.ccdata.com
> 
> When replying, please edit your Subject line so it
> is more specific
> than "Re: Contents of rovernet digest..."
> 
> 
> [ROVERNET-UK]
> 
> Today's Topics:
> 
>    1. Re:  P6B BW35 trans leak (Ben Rodgers)
>    2.  TC parts available (Gordon Harrower)
>    3. Re:  TC parts available (birdie)
>    4. RE:  TC parts available (Paul Smith)
>    5. Re:  TC parts available (Gordon Harrower)
>    6. Re:  TC parts available (Gordon Harrower)
>    7. RE:  P6B BW35 trans leak (Aidrian
> Bridgeman-Sutton)
>    8.  Front Spring Safety  (geffandjulie)
>    9. Re:  TC parts available (carlin h freeberg)
> 
> 
>
----------------------------------------------------------------------
> 
> Message: 1
> Date: Sun, 3 Dec 2006 22:02:52 -0400
> From: "Ben Rodgers" <irishrover at netscape.ca>
> Subject: Re: [ROVERNET - UK] P6B BW35 trans leak
> To: <rovernet at lyris.ccdata.com>
> Message-ID:
> <000601c71748$4ff1cf80$5fc63042 at yourc8bh3jaglt>
> Content-Type: text/plain;	charset="iso-8859-1"
> 
> Hi Paul
>           Its been a while but I remember dropping
> the trans without
> removing the engine, it can be disconnected at the
> bellhousing and is then
> relatively easy to remove and reinstall.
>                                                     
>   Regards Ben.
> 
> FREDERICK  (BEN) RODGERS.CD
> Born in Belfast, Northern Ireland,
> Author of "lily and me" a great book and a great
> read .
> Order on line at amazon
> Visit my web page  http://home.netscape.ca/~rodgl/
> 
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Sun, 03 Dec 2006 21:23:05 -0500
> From: Gordon Harrower <griffo at comcast.net>
> Subject: [ROVERNET - UK] TC parts available
> To: rovernet at lyris.ccdata.com
> Message-ID: <45738689.9000900 at comcast.net>
> Content-Type: text/plain; charset=ISO-8859-1;
> format=flowed
> 
> I'm losing my storage area, so I have to dispose of
> a large amount of P6 
> parts.  There's a variety of body parts (bonnets,
> boots, doors, interior 
> trim and fittings), an engine and gearbox, carb and
> brake servo sets and 
> much miscellany, so if you need something specific,
> please ask.
> 
> Meanwhile, Pierre has graciously allowed me to offer
> for sale to the 
> Rovernet the gearbox parts I bought from him but
> didn't need.  They are 
> bearings and seals, all NOS. 
> 
> Gordon.
> 
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Sun, 03 Dec 2006 18:36:28 -0800
> From: birdie <birdies at ix.netcom.com>
> Subject: Re: [ROVERNET - UK] TC parts available
> To: rovernet at lyris.ccdata.com
> Message-ID: <457389AC.4040700 at ix.netcom.com>
> Content-Type: text/plain; charset=ISO-8859-1;
> format=flowed
> 
> 
> Where are you?
> 
> 
> Gordon Harrower wrote:
> 
> > I'm losing my storage area, so I have to dispose
> of a large amount of 
> > P6 parts.  There's a variety of body parts
> (bonnets, boots, doors, 
> > interior trim and fittings), an engine and
> gearbox, carb and brake 
> > servo sets and much miscellany, so if you need
> something specific, 
> > please ask.
> >
> > Meanwhile, Pierre has graciously allowed me to
> offer for sale to the 
> > Rovernet the gearbox parts I bought from him but
> didn't need.  They 
> > are bearings and seals, all NOS.
> > Gordon.
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the
> bottom and follow 
> > instructions:
> >
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> > Back-up list and photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
> >
> 
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 4 Dec 2006 14:00:42 +1100
> From: "Paul Smith" <Paul.Smith at auroraenergy.com.au>
> Subject: RE: [ROVERNET - UK] TC parts available
> To: <rovernet at lyris.ccdata.com>
> Message-ID:
> 
>
<FBD1E865E6916B4B958ADFD21F42830CE05522 at corpexch1.corp.local>
> Content-Type: text/plain;	charset="iso-8859-1"
> 
> How much for the box bearings and seals?
> Also where are you...
> 
> PVS
> 
> -----Original Message-----
> From: rovernet-bounces at lyris.ccdata.com
> [mailto:rovernet-bounces at lyris.ccdata.com]On Behalf
> Of Gordon Harrower
> Sent: Monday, 4 December 2006 1:23 pm
> To: rovernet at lyris.ccdata.com
> Subject: [ROVERNET - UK] TC parts available
> 
> 
> I'm losing my storage area, so I have to dispose of
> a large amount of P6 
> parts.  There's a variety of body parts (bonnets,
> boots, doors, interior 
> trim and fittings), an engine and gearbox, carb and
> brake servo sets and 
> much miscellany, so if you need something specific,
> please ask.
> 
> Meanwhile, Pierre has graciously allowed me to offer
> for sale to the 
> Rovernet the gearbox parts I bought from him but
> didn't need.  They are 
> bearings and seals, all NOS. 
> 
> Gordon.
> 
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the
> bottom and follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
> 
> 
> 
> 
> 
> ------------------------------
> 
> 
=== message truncated ===


_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow instructions:
http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at:
http://autos.groups.yahoo.com/group/Rover_net/





More information about the rovernet mailing list