[ROVERNET - UK] rear hub rebuild

John Burkhard burkhaj at earthlink.net
Sun Aug 6 00:49:28 BST 2006


Hi Larry,

Contact Nelson O'Riley in the San Diego area.  He rebuilt the hubs on his 
P6 TC and had nothing put problems with getting the preload set correctly. 
Both the factory and Haynes manuals have good illustrations showing the 
process.  If the is too much preload it could cause differential problems. 
Get hold of Nelson at: roverfreake619 at yahoo.com .  He also has a local 
source for the collapsible spacer.  Good luck.
----- Original Message ----- 
From: "Larry" <lewill at ctcweb.net>
To: <rovernet at lyris.ccdata.com>
Sent: Saturday, August 05, 2006 3:05 PM
Subject: [ROVERNET - UK] rear hub rebuild


> Has anyone rebuilt a rear hub on a TC? It looks pretty straight forward 
> except the "new collapsible spacer". Is it necessary to get a new one? I 
> have a nasty vibration and you can see that the axle is bent so I am 
> using and old hub and want to rebuild it before I install it. Thanks in 
> advance. Larry
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
> 





More information about the rovernet mailing list