[ROVERNET - UK] P6 Oil Filter

Fri Aug 5 07:10:40 BST 2005

Eric, I got confirmation from Wix that the 51806 
filter has the standpipe, making it correct. 
There is good reason to believe that Fram PH2821A 
is also correct as that is a direct cross to the 
Wix number, but Fram is now discouraged. Finally, 
the NAPA number is made by Wix and is the correct 
construction as well.

Yours
Vern

>Ron,
>Confused but want to learn:
>
>Our RCCC table shows the WIX filter as having an
>anti-drainback valve but no standpipe is mentioned.
>
>In my post regarding the Baldwin filter, their website
>mentions more than the valve:
>*Anti-Drainback Valve
>*8 PSI By-Pass Valve
>*Standpipe
>
>So ................ do you mean you are looking for a
>filter with an internal standpipe?  Are you saying
>that the WIX is not recommended for the 2000TC?  Shall
>I remove the listing?
>
>Last July, Peter Heaster, Malcolm Tait and I studied
>Peter's reference books and came up with that list.  I
>think Malcolm was looking for filter options at that
>time.
>
>Eric
>
>
>
>
>
>--- Ron Morey <morey814 at hotmail.com> wrote:
>
>>  Greetings all. Today I walked into my local NAPA
>>  store and asked about a
>>  51806 filter. To my shock and amazement they had
>>  one. The price for a Wix
>>  filter-<$5. This filter has the tube. Thanks to Eric
>>  and many others it is
>>  the one suggested for a 2000TC. It fits a Perkins
>>  diesel 4.236 litre engine
>>  fitted in forklifts etc. It also fits some Massey
>>  Ferguson tractors. That is
>>  probably not good news to most of you. The Wix site
>>  lists a 68 2000TC as a
>>  6cyl that takes the 51515 filter. I have that filter
>>  on the car now and it
>>  does not retain the oil. So they are wrong on two
>>  counts.
>>  I hope you find this helpful. I kick myself for the
>>  years I have used a
>>  filter without the retaining pipe.
>>  Ron.
>>  >From: Eric Russell <p6rovers at yahoo.com>
>>  >Reply-To: rovernet at lyris.ccdata.com
>>  >To: rovernet at lyris.ccdata.com
>>  >Subject: Re: [ROVERNET - UK] P6 Oil Filter
>>  >Date: Mon, 1 Aug 2005 23:00:58 -0700 (PDT)
>>  >
>>  >Ron,
>>  >When I went to the websites for AC-Delco,
>>  Beck-Arnley,
>>  >Hastings, and Motorcraft, they didn't show a
>>  listing
>>  >for the numbers in the archive or for the Rover
>>  >application.
>>  >
>>  >If anybody can find a current match, I'd like to
>>  use
>>  >the information.  I notice that this list comes
>>  from a
>>  >1997 archive.
>>  >
>>  >Eric
>>  >
>>  >
>>  >--- Ron Venter <venterrh at telus.net> wrote:
>>  >
>>  > > At 09:10 AM 05-08-01, you wrote:
>>  > > >After careful research last year, (July I
>>  think) we
>>  > > >installed some P6 Oil Filter cross-references
>>  on
>>  > > our
>>  > > >website.
>>  > > >
>>  > > >If anyone has other brands with the
>>  recommendations
>>  > > >discussed, please advise and I'll include them
>>  in
>>  > > the
>>  > > >chart.
>>  > > >
>>  > > >Eric
>>  > >
>>  > >
>>  > > From: RoverP6B at pacbell.net
>>  > >
>>  > > Date: Thu, 29 May 1997 19:01:49 +0000
>>  > >
>>  > > To: rovernet at ganglion.anes.med.umich.edu
>>  > >
>>  > > Subject: Re: [Rovernet] 2200 TC Oil Pressure
>>  > >
>>  > > References:
>>  > >
>>  <3.0.32.19970529225615.006c3dfc at mail3.tripnet.se>
>>  > >
>>  > > X-MIME-Autoconverted: from 8bit to
>>  quoted-printable
>>  > > by mail-gw3.pacbell.net
>>  > > id TAA15012
>>  > >
>>  > > Sender:
>>  owner-rovernet at ganglion.anes.med.umich.edu
>>  > >
>>  > > Reply-To: rovernet at ganglion.anes.med.umich.edu
>>  > >
>>  > > X-MIME-Autoconverted: from quoted-printable to
>>  8bit
>>  > > by huey.cadvision.com
>>  > > id UAA227024
>>  > >
>>  > >
>>  > > Tomas Börjeson wrote:
>>  > >
>>  > >  >
>>  > >
>>  > >  > Does anyone know any other manufacturer for
>>  this
>>  > > filter and maybe a # as
>>  > >
>>  > >  > well ?
>>  > >
>>  > >  > My local FRAM agent says that #PH 2821A has
>>  been
>>  > > discontinued. (At least In
>>  > >
>>  > >  > SWEDEN )
>>  > >
>>  > >
>>  > > Hi Tomas,
>>  > >
>>  > >
>>  > > Fram lists these #s in their "Master Catalog" as
>>  > > interchanging with
>>  > >
>>  > > the PH 2821A oil filter for the Rover 2000. I
>>  hope
>>  > > it helps.
>>  > >
>>  > >
>>  > > AC-Delco PF42, PF939, SC, X16
>>  > >
>>  > > Baldwin BT216
>>  > >
>>  >Snipped
>>  >
>>  >
>>  >Webmaster & Magazine Editor:
>  > >The Rover Car Club of Canada -  www.roverclub.ca
>>  >
>>  >__________________________________________________
>>  >Do You Yahoo!?
>>  >Tired of spam?  Yahoo! Mail has the best spam
>>  protection around
>>  >http://mail.yahoo.com
>>  >
>>  >_______________________________________________
>>  >rovernet mailing list
>>  >rovernet at lyris.ccdata.com
>>  >To unsubscribe, go to this web page, look near the
>>  bottom and follow
>>  >instructions:
>>  >http://mailman.nipltd.com/mailman/listinfo/rovernet
>>
>>
>>
>>  _______________________________________________
>>  rovernet mailing list
>>  rovernet at lyris.ccdata.com
>>  To unsubscribe, go to this web page, look near the
>>  bottom and follow instructions:
>>  http://mailman.nipltd.com/mailman/listinfo/rovernet
>>
>
>
>
>Webmaster & Magazine Editor:
>The Rover Car Club of Canada -  www.roverclub.ca
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>
>_______________________________________________
>rovernet mailing list
>rovernet at lyris.ccdata.com
>To unsubscribe, go to this web page, look near 
>the bottom and follow instructions:
>http://mailman.nipltd.com/mailman/listinfo/rovernet

--
Vern Klukas                             I'm a little . . .
Inkspot Type & Design
vern at inkspotco.com