[ROVERNET - UK] oil anyone?

Paul Smith vmi2148 at bigpond.net.au
Sun Oct 3 07:25:48 BST 2004

I thoroughly recommend Nulon when engine has had a rebuild.
Don't know about worn enignes.


----- Original Message ----- 
From: "Mike Shaddick" <mikshdik at ozemail.com.au>
To: <rovernet at lyris.ccdata.com>
Cc: <Rover1964 at att.net>
Sent: Saturday, October 02, 2004 5:36 PM
Subject: Re: [ROVERNET - UK] oil anyone?

> At least one tappet (hydraulic lifter) rattles like blazes, especially
> when the engine is cold.
> The oil I have been using is Penrite HPR 30, which is a 20/60 multigrade.
> My inclination is to give the motor a good flush with a commercial flush
> additive followed by a second flush with light (sae 10) and then to fill
> with straight sae30 (asb Fritz) - with a Nulon Teflon additive.
> This is to avoid stripping the top end down to get at the lifter (s) and
> replacing it (them)
> Please let me have your thoughts.
> kanjane
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet 

More information about the rovernet mailing list