[ROVERNET - UK] P6 Front Suspension

[James Dean]

I am sure I have a good used steering damper, and am in Ft Lauderdale-954
524 8277, James Dean.
----- Original Message -----
From: "Ron Morey" <morey814 at hotmail.com>
To: <rovernet at lyris.ccdata.com>
Sent: Wednesday, June 23, 2004 12:26 AM
Subject: Re: [ROVERNET - UK] P6 Front Suspension


> Tom, the steering damper will also cause noise over bumps if it is low on
> oil or worn. It is a very simple device that uses 90W oil to limit
steering
> vibration. If it has sufficient fluid that is clean then it is also
possible
> that the vanes or bushings are worn. If you are unable to locate a good
> steering damper it is possible to disassemble and have the vanes built up
> and machined. It is not as hard as it sounds. Hope this helps.
> Ron.
> >From: "Tom Trafton" <v8rover at earthlink.net>
> >Reply-To: rovernet at lyris.ccdata.com
> >To: <rovernet at lyris.ccdata.com>
> >Subject: Re: [ROVERNET - UK] P6 Front Suspension
> >Date: Tue, 22 Jun 2004 16:26:35 -0700
> >
> >Hi Paul
> >
> >Yes I would be very much interested in knowing how you used a normal
spring
> >compressor.  I tried two different types but there was insufficient room
to
> >use the compressor.  Send the photos to v8rover at earthlink.net and thanks
in
> >advance for the help.
> >
> >Cheers,
> >
> >Tom
> >
> >----- Original Message -----
> >From: "Paul Smith" <Paul.Smith at auroraenergy.com.au>
> >To: "Rovernet (E-mail)" <rovernet at lyris.ccdata.com>
> >Sent: Tuesday, June 22, 2004 3:37 PM
> >Subject: [ROVERNET - UK] P6 Front Suspension
> >
> >
> > > I have removed the springs with normal spring compressors, can supply
> > > pictures of it if you wish.
> > >
> > > PVS
> > >
> > > ----- Original Message -----
> > > From: "Tom Trafton" <v8rover at earthlink.net>
> > > To: "RoverNet Mailing List" <rovernet at lyris.ccdata.com>
> > > Sent: Monday, June 21, 2004 2:05 PM
> > > Subject: [ROVERNET - UK] P6 Front Suspension
> > >
> > >
> > > > I'm not sure that I really have a question but more like looking for
> >some
> > > > thoughts/experience/opinions on the top link assembly for the P6
> > > suspension.
> > > > I managed to rebush all the front suspension links and install new
> >ball
> > > > joints but was unable to remove the springs.  As a result the
original
> > > > bushes are still in place for the top link assembly, as well as the
> >rubber
> > > > cushion and bump stop for the springs themselves.
> > > >
> > > > Now when I drive the car I am feeling/hearing a sort of heavy
> >'clunking'
> > > > noise on occasion from the front end.  The top link bushes are
> >complete
> > > and
> > > > still in place but seem to be cracked.  I am wondering if those old
> >bushes
> > > > could be a source of my problem.  Has anyone had any problems with
> >this
> > > area
> > > > of the front suspension?  What were the symptoms?
> > > >
> > > > Sorry for such a nebulous, rambling query but before I start tearing
> >into
> > > > the hardware, I want to benefit from the accumulated knowledge of
the
> > > > Rovernet world:-)  Any and all help would be greatly appreciated.
> > > >
> > > > Tom
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > rovernet mailing list
> > > > rovernet at lyris.ccdata.com
> > > > To unsubscribe, go to this web page, look near the bottom and follow
> > > instructions:
> > > > http://mailman.nipltd.com/mailman/listinfo/rovernet
> > >
> > >
> > >
> > > _______________________________________________
> > > rovernet mailing list
> > > rovernet at lyris.ccdata.com
> > > To unsubscribe, go to this web page, look near the bottom and follow
> >instructions:
> > > http://mailman.nipltd.com/mailman/listinfo/rovernet
> >
> >
> >
> >_______________________________________________
> >rovernet mailing list
> >rovernet at lyris.ccdata.com
> >To unsubscribe, go to this web page, look near the bottom and follow
> >instructions:
> >http://mailman.nipltd.com/mailman/listinfo/rovernet
>
> _________________________________________________________________
> Add photos to your messages with MSN Premium. Get 2 months FREE*
>
http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=htt
p://hotmail.com/enca&HL=Market_MSNIS_Taglines
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow
instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet